3. Press the ignition button with left hand, and at the same
time, press the valve operation knob and turn right (clockwise)
60 degree with right hand, and then sound of high pressure
ignition discharge shall be heard. Grill shall be ignited and the
flame shall go through all the fire holes quickly, the flame shall
be stable. After 4-5 seconds you can stop the operating of both
hands.
4. Confirm the grill working normally, after puting the foods
material that need to be grilled, close the oven door lightly. Do
not close the door rapidly and strongly, or the flame will go out
because of the leaping of the pressure in cavity.
5. After closing door, observe the flame is buring stable
through the window, set the timer to grill accroding to user's
need.
The working principal of heating element (only for some
models):
• Press the knob and rotate it counterclock wise, meantime
press the ignition switch or use ignition rod to lit the lower
burner, then the lower gas burner start to work, adjust the
power according to the food, after the food well cooked, rotate
the knob clockwise to the off position, then the lower gas
130
burner was off.
• When it is necessary to make the color of the food darker,
press the knob and rotate it clockwise to Grill position, then the
250
upper electrical heater start to work, after finish the work rotate
the knob counter clockwise until off position, then the upper
heater stopped working.
• While in OFF position, both of the lower gas burner and the
upper electrical heater are in closed status.
English-16