Pontos Scout Wireless Ground Sensor - Hansgrohe Pontos Scout 15887000 Instrucciones De Montaje

Pontos Scout wireless
ground sensor
Smart sensor with rapid alert system
The Pontos Scout is used in critical areas
or places requiring intense monitoring.
If the smart sensor registers water on the
floor, excessively low room temperature
or excessively high air humidity, it will
emit a warning with a flashing LED and
loud warning signal.
If the Pontos Scout wireless ground
sensor is connected to an installed
Pontos Base for leakage protection, the
Pontos Scout will report a water leak to
the Pontos Base, which will immediately
shut off the pipeline. The Pontos Scout
wireless ground sensor can be
controlled via the hansgrohe home app.
Specifications
Battery:
Protection type:
Wireless protocol:
Hansgrohe SE hereby declares that the

Pontos Scout wireless ground sensor

complies with Directive 2014/53/EU.
The full text of the EU Declaration of
Conformity can be accessed on the
following website: pro.hansgrohe.com
6
English
2 x 1.5 V AA (LR6)
IPX4
Wi-Fi 2.4 GHz
Registration and set-up
The Pontos Scout wireless ground
sensor is controlled solely via the
hansgrohe home app. To install the
app, please scan this QR code
or visit this website: https://www.
hansgrohe.com/smart-living/app
The website features a step-by-step
guide on how to install the hansgrohe
home app and set up the Pontos Scout.
The device can only be connected if
you are in your home network.