GreenWorks PS24B00 Manual Del Propietário página 9

ASSEMBLY INSTRUCTION
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure
to do so could result in objects being thrown into your eyes, resulting in possible serious injury
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
FITTING THE POLE SAW (See Figure 2)
Before using the pole saw, assembly is required. When removed from the box, there are the
three poles as shown below.
• The saw head can be mounted directly on polesaw handle to achieve the standard length.
• Insert the polesaw handle in the saw head.
• Slide the collar upwards and turn it clockwise until it is completely tightened.
EXTENSION OF POLE SAW (See Figure 3)
The maximum reach can be achieved by fitting the extension pole between the polesaw handle
and the saw head.
• Slide the collars up and rotate it clockwise until it is completely tightened.
9
.
Fig. 2