universalblue UAS1906-21 Manual De Instrucciones página 67

2-ºC/ºF
Press this button to select the temperature unit displayed on the
screen between Celsius and Fahrenheit. Default temperature would
be in Celsius. The "ºC" will not be displayed on the LCD.
*Note: Temperature in Fahrenheit is not available on some models
When the temperature is displayed in ºF on the remote control, it
may be in ºC on the unit; the functions and control will not be
affected by this.
3-SPEED
Press the "SPEED" button to select the fan speed in the following
sequence:
*Note: AUTO speed will not be available in FAN mode
4-DISPLAY
Press this button to turn the screen on/off on the unit. This is for
those users who are bothered by the backlighting on the unit.
5-iFEEL
Press this button to select the temperature displayed on the remote
control, between room temperature and selected temperature.
6-TIMER
With the unit on, press this button to turn the timer off/on.
Pressing this button once will cause the ON/OFF light to start
flashing. Press or to select the number of hours after which
the device will turn on or off, with intervals of 0.5 hours if less than
10 hours, or 1 hour if more than 10 hours, with a total range of 0.5-
24 hours.
67