universalblue UAS1906-21 Manual De Instrucciones página 69

Note: the temperature cannot be selected in AUTO and FAN modes
because they are incompatible.
9-TURBO
Press this button only when the unit is in COOL or HEAT mode to
turn the TURBO mode on or off, to speed up the cooling or heating
speed.
When the TURBO mode is activated, the air speed will be higher.
When the TURBO mode is off, the air speed will be reset to its
previous state.
10-MODE
By pressing this button, you can select between the different modes
in this sequence:
Note: HEAT mode is not available for cold-only units.
11-SLEEP
Press this button to enter SLEEP mode, from which the unit will
return to its previous state after 10 hours of operation.
Note: SLEEP function cannot be activated in FAN mode.
12-SWING
Press this button to activate the up/down oscillation and press it
again to set the position.
13-SWING
Press this button to activate the right/left oscillation and press it
again to set the position.
69