Oase Water Jet Lightning Instrucciones De Uso página 9

Fitting the water feature
• Mount the unit on a firm ground, e.g. sidewalk slab. (The assembly material is not included in
the scope of delivery.)
• Ensure a safe, horizontal position.
Fitting the pump
NOTE
If the pump is used for conveying excessively muddy water, the impeller unit will be subject to
increased wear and will require earlier replacement.
 Thoroughly clean the pond or pool before installing the pump.
 Install the pump at a raised level above the bottom of the pond. This reduces intake of muddy
water.
• Install the pump housing horizontally on a firm, mud-free surface. Ensure that the pump hous-
ing is securely positioned.
• Operate the pump only when it is covered with at least 4 in (10 cm) of water. Otherwise, it may
draw air.
EN
WJL0006
WJL0005
9