Adjusting the opening of the dispenser cups
UN41 0227EH
Depending on the type of seedlings and on the rotation
speed, when the seedlings go down the dispenser they
may knock the side of the opening of the drop pipe and
fall in way which is not perpendicular.
Adjust the opening of the cups to release the seedling in
the centre of the drop pipe.
The cam (A) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (C).
The cam (B) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (D).
English language
ADJUSTMENT INFORMATION
A
E
F
F
D
E
B
For adjustments, proceed as outlined below.
- Loosen the screws (E) and use the cam (B).
- Turn the cam in the direction (1) to anticipate the
opening of the cup.
- Turn the cam in the direction (2) to postpone the
opening of the cup.
Once the adjustment is complete, tighten the screws
(E).
- Loosen the screws (F) and use the cam (A).
- Turn the cam in the direction (1) to anticipate the
opening of the cup.
- Turn the cam in the direction (2) to postpone the
opening of the cup.
Once the adjustment is complete, tighten the screws
(F).
21
2
1
1
2
Use and maintenance
5
C