Stiga A 1500 Manual De Instrucciones página 13

At the end of the mow- Battery
ing season or every
six months if the robot
lawn mower is not
used
Annual or at the end Robot lawn mower Carry out the servicing
of the cutting season
It is necessary to carry out a maintenance servicing annually
at an authorized service centre to keep the robot lawn mower
in good working conditions.
NOTE: any malfunction due to not having carried out the
annual servicing will not be recognized under warranty.
4.2. REPLACEMENT OF THE CUTTING BLADES
1. Press the "STOP" push button (Fig. 1.A) to stop the robot
lawn mower and open the protective cover (Fig. 1.B).
2. Remove the safety key (Fig. 1.C).
3. Turn the robot lawn mower upside down, taking care not
to damage the floating cover.
4. Unscrew the fixing screws (Fig. 9.E).
5. Replace the cutting blades (Fig. 9.D) and the fixing
screws (Fig. 9.E).
6. Tighten the fixing screws (Fig. 9.E).
4.3. WINTER BATTERY MAINTENANCE AND
STORAGE
1. Charge the battery according to the APP wizard, accessible
from the "Settings" page.
2. Clean the robot lawn mower (See Smart User Manual).
3. Check the robot lawn mower is switched off and store in
a dry place, protected from icy conditions.
NOTE: For more detailed information on the winter
charging procedure, please refer to the Smart User
Manual.
NOTE: Registering the charge through the app procedure
is required for the battery warranty to be valid.
6. TROUBLESHOOTING
CAUTION:
Stop the robot lawn mower and bring it back to safety conditions (See Par. 1.4).
Below there is the list of any anomalies that may arise during the work phase.
PROBLEM
Abnormal vibrations. The robot lawn
mower is noisy.
Perform the
pre-storage charging of
the battery. (See Par. 4.3)
at an authorized service
centre. (See Par. 4.1)
CAUSES
Damaged cutting disc or blades
Cutting device blocked by residues (tapes, ropes,
plastic fragments, etc.).
The robot lawn mower was started in the presence
of unexpected obstacles (fallen branches,
forgotten objects, etc.).
Electric motor failure
Grass too tall
EN
4.4. BATTERY REPLACEMENT
Battery replacement is the sole responsibility of the STIGA
TECHNICAL ASSISTANCE STAFF.
If the battery needs to be replaced, contact a service centre
or your retailer.
5. TRANSPORT, STORAGE AND
DISPOSAL
5.1. TRANSPORT
NOTE: We recommend using the original packaging for
transport over long distances.
1. Press the "STOP" push button (Fig. 10.A) to stop the robot
lawn mower and open the protective cover (Fig. 10.B).
2. Remove the safety key (Fig. 10.C).
3. Clean the robot lawn mower (See Smart User Manual).
4. Lift the robot lawn mower by its handle (Fig. 10.D) and
carry it, making sure you keep the cutting blade away
from the body.
5.2. STORAGE
The robot lawn mower must be stored in a dry and frost-free
place after cleaning and charging the battery in the winter
(see Chap. 4).
5.3. DISPOSAL
CAUTION:
To remove the battery from the robot lawn
mower, contact an authorized service centre.
1. Dispose of the product packaging in a sustainable way in
the appropriate collection containers or at special centres
authorized for collection.
2. Dispose of the robot lawn mower in accordance with local
legal requirements.
3. Contact appropriate facilities for recycling and disposal
as the robot lawn mower is classified as WEEE (Waste
Electrical and Electronic Equipment).
4. Dispose of old or used batteries in a sustainable way in
collection containers or at authorized collection centres.
SOLUTIONS
Replace the damaged components (See Par. 4.2).
Switch off the robot lawn mower in safety conditions
(See Par. 1.4). Unlock the cutting blade.
Switch off the robot lawn mower in safety conditions (See
Par. 1.4). Remove the obstacles and restart the robot
lawn mower.
Replace the motor, contact a service centre.
Increase the cutting height (SeePar. 3.5).
First mow the area with a normal lawnmower
6