Zanussi ZFC11400WA Manual De Instrucciones página 5

Operation
Switching on
C
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator to the Full
Loaded position and let the appliance run
for 24 hours to allow the correct
temperature to be reached before placing
food inside.
The pilot light will light up.
3. Adjust the Temperature Regulator
according to the quantity of the stored
foods.
Switching off
Turn the Temperature regulator to the OFF
position.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
Before first use
WARNING!
Refer to Safety chapters.
Cleaning the interior
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
Daily use
WARNING!
Refer to Safety chapters.
1 Refer to "Technical data"
www.zanussi.com
A) Temperature Regulator
B) Half Loaded position
C) Full Loaded position
A
B
To operate the appliance, proceed as follows:
• to obtain the minimum coldness, turn the
Temperature Regulator toward lower
settings.
• to obtain the maximum coldness. turn the
Temperature Regulator toward higher
settings.
In case of freezing less food
volumes, the Half Loaded setting is
the most suitable. In case of freezing
much food volumes, the Full Loaded
setting is the most suitable.
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION!
Do not use detergents or abrasive
powders, as these will damage the
finish.
5