PURE ADVANCE FLEX Manual De Instrucciones página 18

2.7.5 Drive mode
The drive mode is displayed with the
The first time you use the e-scooter, it is set to the 'normal' mode. Double
pressing of the multifunction button will enable you to cycle through the
drive modes.
The chosen drive mode is saved when the e-scooter is turned off.
Double Press
Normal mode
S = White
For everyday riding
2.7.6 Indicator
Indicator lights are triggered by a press of the left or right indicator buttons.
Green arrows in the top corners of screen flash in sync with the indicators.
Indicator lights are cancelled with a second short press of the button.
Indicators automatically self cancel after 30 seconds.
18
icon above the speed display.
Double Press
Double Press
High mode
S = Red
For enhanced hill
climbing and maximum
acceleration
Pedestrian mode
Speed limit = 6km/h
(Headlight flashes
during this mode)
Pure Advance Flex