Morso FORNO SPIN Instrucciones De Uso página 102

READ ME FIRST
READ ME FIRST
Gas leak testing
Gas leak testing
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
reconnected to the BBQ.
reconnected to the BBQ.
To Complete Leak Test
To Complete Leak Test
• Make sure all the control knobs are OFF.
READ ME FIRST
• Make sure all the control knobs are OFF.
• In a small container, mix up a solution of water and detergent/soap.
• In a small container, mix up a solution of water and detergent/soap.
• Mix the solution well (about the same concentrate as washing up water).
• Mix the solution well (about the same concentrate as washing up water).
Gas leak testing
• Turn the cylinder ON by rotating the knob to open position.
• Turn the cylinder ON by rotating the knob to open position.
• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
It is important that you leak test the appliance before first use and every time the gas cylinder is refilled and
- the gas connection at the inlet of the BBQ
- the gas connection at the inlet of the BBQ
reconnected to the appliance.
- all gas hose connections
- all gas hose connections
- the gas connection at the gas cylinder
- the gas connection at the gas cylinder
To complete leak test
• If bubbles appear, there is a gas leak.
• If bubbles appear, there is a gas leak.
• Make sure all the control knobs are OFF. • If the leak is at the connection, re-tighten and re-seal.
• If the leak is at the connection, re-tighten and re-seal.
• In a small container, mix up a solution of water and detergent/soap. • If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
• Mix the solution well (about the same concentrate as soapy water). • Replace gas hose and regulator.
• Replace gas hose and regulator.
• Replace hose and regulators can be purchased from your local BBQ retail specialist.
• Turn the regulator on the gas bottle to the open position.
• Replace hose and regulators can be purchased from your local BBQ retail specialist.
• Using a brush or spray bottle apply the soap solution to the gas line and each Connection in the gas line
including:
- the gas connection at the inlet of the appliance
- all gas hose connections
- the gas connection at the gas cylinder
• If bubbles appear, there is a gas leak.
• If the leak is at the connection, re-tighten and re-seal.
• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
• Replace gas hose and regulator.
• Replacement hose and regulators can be purchased from your local boiler retail specialist.
102
READ ME FIRST
READ ME FIRST
Gas leak testing
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
Gas leak testing
reconnected to the BBQ.
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
reconnected to the BBQ.
To Complete Leak Test
• Make sure all the control knobs are OFF.
To Complete Leak Test
• In a small container, mix up a solution of water and detergent/soap.
• Make sure all the control knobs are OFF.
• Mix the solution well (about the same concentrate as washing up water).
• In a small container, mix up a solution of water and detergent/soap.
• Turn the cylinder ON by rotating the knob to open position.
• Mix the solution well (about the same concentrate as washing up water).
• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
• Turn the cylinder ON by rotating the knob to open position.
- the gas connection at the inlet of the BBQ
• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line includin
- all gas hose connections
- the gas connection at the inlet of the BBQ
- the gas connection at the gas cylinder
- all gas hose connections
• If bubbles appear, there is a gas leak.
- the gas connection at the gas cylinder
• If the leak is at the connection, re-tighten and re-seal.
• If bubbles appear, there is a gas leak.
• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCE
• If the leak is at the connection, re-tighten and re-seal.
• Replace gas hose and regulator.
• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROC
• Replace hose and regulators can be purchased from your local BBQ retail specialist.
• Replace gas hose and regulator.
• Replace hose and regulators can be purchased from your local BBQ retail specialist.