Morso FORNO SPIN Instrucciones De Uso página 22

ASSEMBLY INSTRUCTIONS
Remove any transit protection materal
STEP 1
Place the Pizza Stone on the Pizza Stone Tray as the
picture shows. Make sure the tray pizza stone is cen-
tered on top of the tray.
STEP 2
Connect the power cord and connector to the Morsø
Forno Spin as the picture shows, and tighten the power
cord to the Morsø Forno Spin.
STEP 3
Connect the hose to the Morsø Forno Spin. Turn the
nut on the hose counterclockwise until the hose is
firmly connected to the thread of the Morsø Forno
Spin. Use a 17 mm (or adjustable) spanner to ensure a
tight connection.
CONNECTING THE GAS CYLINDER
Use Propane/butane mix, which is supplied in gas
cylinders.
The gas cylinders must be positioned adjecent or
below Morsø Forno Spin.
The connection between the gas cylinder
and the Morsø Forno Spin is made with a regulator.
It is important that you use the correct regulator which
follows the product.
22
STEP 1
STEP 2
STEP 3