Publicidad
Idiomas disponibles
Idiomas disponibles
2
- Select the right down rod depending
on the height of your ceiling.
-
If neither of the down rods fits,
contact your fan distributor.
- Remove the locking pin, the two
screws off the coupler.
- Place the downrod through the
canopy, and route the electrical cables
through the extension.
- Insert the extension into the coupler,
insert the coupling screws and the pin,
tighten the two screws on the coupler
and close with the cover
3
- Fixing blade to the motor assembly by two screws.
- Repeat step for all blades.
coupler
Motor assembly
5
power cord
canopy
rubber
ring
coupling
cover
bolt
locking pin
Blade
Publicidad
