Publicidad
Idiomas disponibles
Idiomas disponibles
6
Slide the remote controller receiver
unit into the slot on the mounting
bracket.
7
Hang the fan motor housing on the
mounting bracket, ensure the ball joint
locating the groove aligns with the
notch on the mounting bracket.
8
Unscrew the two top canopy fixing screws
halfway attached at the bottom of the mounting
bracket.
Slide the top canopy up the downrod onto the
mounting bracket. Turn the canopy until fixing
screws lock into position and then fasten the
screws.
9
Raise up the rubber ring to cover
the screws.
Notch
Locating groove
7
Publicidad
