Publicidad
Idiomas disponibles
Idiomas disponibles
4
Put the power supply wires
through the rubber pad.
5
Wire-in the remote controller receiverunit as shown in the figure below. Terminal
block on the mounting bracket must be used between the receiver output wire and
the motor light wires. Terminal block provided separately along with the remote
controller pack must be use to connect between the supply wire.
To fan
Canopy
Pink (brown)
To motor
Grey
wire
Red
Remote receiver
Brown
Blue
Yellow/Green
Black wire
Antenna wire
6
Power supply
Power supply live-wire
Power supply neutral-wire
Ground wire
Publicidad
