Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING!
When using power tools, you should
consider basic safety precautions to avoid the risk of
fire, electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
in order to ensure your own safety. Always use the
multistage centrifugal pump carefully and responsibly. In
using the device, you accept full responsibility for any
accidents caused to third parties or their goods during its
use.
The multistage centrifugal pump may only be used by
people who have read the instruction manual and are
familiar with its handling. Before operating the multistage
centrifugal pump for the first time, users should be
instructed by the seller or any other qualified person on
how to use it. Users must ensure they are instructed
adequately and practically.
The instruction manual is considered an integral part of the
multistage centrifugal pump and must always be made
available alongside the appliance.
Familiarize yourself with the control devices and use of the
multistage centrifugal pump. In particular, the user must
know how to quickly stop it.
Do not run the multistage centrifugal pump if you are not
both physically and mentally well. Do not operate it while
you are tired or under the influence of medication, drugs or
alcohol. If you have a health problem, ask your doctor if it
is safe for you to use the multistage submersible water
pump before doing so.
Never allow the multistage centrifugal pump to be used by
children, individuals with limited physical, sensory or
mental abilities, individuals with lack of experience and
knowledge of the appliance, or others unfamiliar with the
use instructions.
Do not operate the pump in aquariums or tanks
where there are fish.
The multistage centrifugal pump may only be used as
stated in this instruction manual. Any other use,
which may be dangerous and may cause injury to the user
or damage to the multistage centrifugal pump, is not
permitted.
For safety reasons, any alteration to the multistage
centrifugal pump other than installing accessories
specifically authorized by the manufacturer, is prohibited.
The warranty on your water pump will be voided if you alter
it in any way.
You may get information on authorized accessories from
your official VITO dealer.
The power cord must be plugged into a 230V 50Hz
socket with differential protection.
The circuit breaker must be set to trip when there is a
maximum fault current of 30mA and to allow nominal
currents above 6A.
According to the VDE 0100 standard, the use of
pumps in swimming pools, ponds and garden
fountains is only permitted with the use of circuit breakers
integrated in the power supply circuit that supply the
pump. If there are people in the pool or in the garden pond,
it is not allowed to use the multistage centrifugal pump.
Protect the sockets from moisture. If there is a risk of
flooding, install the sockets in a location that cannot be
affected by flooding or install properly protected sockets.
Protect the power cord, plug and socket from coming into
contact with heat, oil and sharp objects. If the power cord
is damaged, it must be replaced by a qualified technician.
It must not be repaired.
Ensure the multistage centrifugal pump is only used by
individuals who have familiarized themselves with the
instruction manual.
Before running the water pump, replace any faulty, worn
out or damaged parts.
Publicidad
