Tripp-Lite PDUMH30AT Manual Del Propietário página 7

Installation
Connecting the PDU
Note: The PDU includes two input power cords: Primary and Secondary. They should be connected to two
separate AC power sources.
Connect PDU Input Plugs: Connect
1
the Primary input plug
source of grounded AC power (120V
for PDUMH30AT, PDUMNH30AT2 &
PDUMH30ATNET; 200-240V for
PDUMH30HVAT, PDUMNH30HVAT2,
PDUMH30HVATNET, PDUMH32HVAT,
PDUMNH32HVAT2 &
PDUMH32HVATNET), such as a
Tripp Lite SmartOnline
Under normal operating conditions, the
PDU will distribute AC power from the
Primary input source. Connect the
Secondary input plug
alternative source of grounded AC
power (120V for PDUMH30AT,
PDUMNH30AT2 & PDUMH30ATNET;
200-240V for PDUMH30HVAT,
PDUMNH30HVAT2,
PDUMH30HVATNET, PDUMH32HVAT,
PDUMNH32HVAT2 &
PDUMH32HVATNET), For proper ATS
(automatic transfer switch) function, do
not plug the Secondary input into the
same power source as the Primary
input. The PDU will distribute AC power
from the Secondary input only if the
Primary input becomes unavailable due
to an outage or power quality problem.
(See Configuration and Operation
section for more information about the
ATS function.)
to a preferred
A
UPS System.
®
to an
B
7
1
To UPS
To UPS
A
B