Cheyenne HAWK PEN UNIO Instrucciones De Uso página 38

You can infinitely adjust a stroke from
2.5 mm to 4.0 mm on the machine.
There are two additional locking posi-
tions between the end positions for 3.0
and 3.5 mm stroke, which you can easily
identify by the semi-circular scaling. You
can set the positions between the lock-
ing settings as well.
You can turn the rear sleeve by 180° to
set the stroke position:
Turn the rear sleeve to the desired
E
position.
Each time after adjusting the stroke,
E
re-adjust the needle depth.
38 EN
6.4 Loading with ink
Immediately before use, dip the tip of
E
the needle cartridge in the desired
color of ink for 2 to 3 seconds with
the unit running. Avoid contact with
the ink container. The ink is picked up
by the needles. Alternatively, the ink
can be filled into the opening on the
needle cartridge using a sterile
pipette.
7 Cleaning and maintaining
the tattoo machine
CAUTION
Risk of short-circuit
If components of the tattoo machine are
dismantled and cleaned while still pow-
ered, there is a risk of damage to the elec-
tronics in the drive unit.
For any cleaning and maintenance
E
work, always disconnect the tattoo
machine completely from its voltage
source (power unit or power adapter).
NOTICE
Damage to drive caused by fluid
If cleaning fluid or disinfectant gets inside
the drive, this can corrode the electrical
and mechanical components.
E Never immerse the drive in disinfec-
tant.
E Never use an autoclave or an ultra-
sonic bath to clean the drive and the
connecting cable.
E Pay attention to compatibility of mate-
rials when selecting cleansers and dis-
infectants (see chapter
page 38).
7.1 Material compatibilities
Wherever possible, use one of the fol-
E
lowing disinfectants:
Manufac- Product
turer
Big Spray
Antiseptica
"new"
Bode Chemie Bacillol
Ecolab Incidin Foam 1 to 2 mins
Cheyenne HAWK Pen Unio
7.1 on
Exposure
time
1 to 5 mins
30 s to 1 min