Descargar Imprimir esta página

universalblue UVT1338-22 Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

engine damage.
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory, or mental capabilities
or lack of knowledge, unless
they are receiving supervision
or instruction regarding the use
of the appliance by a responsible
person. You should check that
children do not use the fan as a
toy.
The fan cannot be started in
a room with a gas appliance
running at the same time.
Do not insert any objects into
the fan blades while they are
rotating.
This
them and upset the balance of
the ventilator, even knocking it
down.
After the fan is fully installed,
make sure that all fasteners are
secure to prevent the machine
from wobbling or falling.
Due to the natural motion of
the
fan,
may become loose. Check the
connections
a year, and if they are loose,
tighten them.
The replacement of the light of
this fan can only be effected by
the manufacturer, especialized
technical service or any other
qualified and certified technical
service
in
operation faults or health risks.
PRODUCT FEATURES
The contents of the package will contain
can
damage
some
connections
at
least
twice
order
to
the following. See pictures 01 on pages 4.
Note: The picture is for reference only. The
content may vary depending on the model.
Packaging content:
1. Screws, washers and screw anchors
2. Fan
3. Remote control
4. Assembling support.
You can check the product features in table
01 on page 8.
ASSEMBLY AND INSTALLATION
the electrical current from the
installation of your home. See
picture 03 on page 6.
Before starting with the assembly
we recommend to find the serial
number and save it. You can find
this number, referred to as "S/N"
in a label pasted on the outside of
the motor housing. You can write
down this number in the warranty
document. It is mandatory to
provide the serial number to
the Technical Service for any
intervention. (see picture 09 on
page 9)
WHERE TO INSTALL: (see picture 04 on
page 6)
• Make sure that the place where the fan
avoid
is going to be installed is quite wide, as
this will allow a better air flow and that
the fan blades do not come into contact
with any object, minimum space of
0.6m on each side.
• Do not place the fan in an open space,
Before
installing
appliance, make sure that
the
appliance
unplugged
from
mains. Also disconnect
EN
the
is
the
17

Publicidad

loading