Publicidad
Idiomas disponibles
Idiomas disponibles
In order for the remote control to work, it
must always be aimed at the fan.
Before you start using it, please take a few
minutes to familiarize yourself with the
functions:
5. Light on/off:
• Press this button to turn the light on
or off.
• Code matching: Press the button 3
times continuously within 5 seconds
after turning the power. Light flashes 3
times and code matches successfully.
• Code clearing: Long press the button
and the power on the light, light flashes
3 times, code is cleared successfully.
6. Turning the fan off: Only fan off
function for this key. If want to turn
on fan, press keys of the three speeds
directly.
7. Brightness (more): Press button step
by step until the brightest state.
8. Light colour (more) : Press button step
by step until the warmest state.
9. Selecting the light colour: Chort press
button to change color temperature
neutral white, cold white and warm
white.
10.
Brightness (less): Press button step
by step until the darkest state.
11. Air direction: Control wind deflector
(both close and open). The rotation of
the air deflector do wide the air flux
beam.
12. High speed: Short press, buzzer rings,
turn on (high speed)
13. Low speed: Short press, buzzer rings,
turn on (low speed)
14.
Average speed: Short press, buzzer
rings, turn on (middle speed)
15. Timer:
• Short press 1 time, buzzer rings 1 time
and 1h setting successfully.
• Press 2 times quickly, buzzer ring
twice and 2h setting successfully.
• For stop fan timer, long press button 15
this button-buzzer rings.
16. Light colour (less): : Press button step
by step until the coldest state.
To use the remote control, you must add 2
batteries to the bottom of the remote.
Each
associated with the receiver
included with the fan.
When you turn off the fan with
the remote control, the last light
setting will be saved. For
example, if the light was set in
"warm" position last time you
used it, the next time you turn on the fan
via the remote control the light will be in
the same setting. If you turn on the fan via
your
room's
switch
settings will not be saved and the light will
be on the factory default colorl color de luz
predeterminado desde fabrica.
CLEANING AND MAINTENANCE
This product does not require a great deal
of maintenance. To clean, please follow the
instructions below:
• Desenchufe
primero
Unplug the fan first and wait until it
comes to a complete stop.
• Use only a soft damp cloth.
• Do not use abrasive cleaners.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
ENVIRONMENTAL INFORMATION
This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
in the wrong way.
The symbol on the product indicates that
remote
control
installation,
el
ventilador
and
Electronic
(WEEE).
EN
is
the
By
19
Publicidad
