Publicidad
Idiomas disponibles
Idiomas disponibles
1. After placing the submersible water pump in the suction
location, plug in the power cord;
2. Lift the float switch (7) until the pump starts;
3. To stop the pump, lower the float switch.
1. After placing the submersible water pump in the suction
location, plug in the power cord;
2. The pump starts when the float switch (7) reaches the
maximum level set for the pump to start;
3. The pump shuts off when the float switch reaches the
minimum level set for the pump to stop.
This submersible water pump does not require any
maintenance,
however,
permanently, it should be checked regularly to ensure that
it is kept in perfect working order and has a long lifespan.
Every 3 months:
▪ Control the float switch functioning;
▪ Clean the pump and the float switch (7) using running
water;
▪ Clean the suction area of the pump, remove the mud
accumulated at the bottom and clean the walls if
necessary.
When using the pump as a portable pump, clean it with
running water after each use.
Before carrying out any cleaning work, unplug the
power cord.
In the event of the impeller clogging due to excessive
accumulation of debris, threads or fibres, remove the
suction base and clean the inside of the pump.
1. Loosen the fixing bolts and remove the suction base;
2. Clean the impeller and the impeller chamber, with
running water;
3. Fit the suction base. Tighten the fixing bolts.
if
the
pump
is
installed
For your own safety, if either the impeller or electrical parts
of the pump (power cord or plug and switch) need to be
repaired, these operations should only be performed by
qualified technicians.
Once the pump and its accessories have been cleaned,
store the pump in a stable, safe position, in a dry and mild
place. Avoid storing it in temperatures that are either too
high or too low. The ideal temperature at which to store the
pump is between 5 and 30°C.
Protect the pump from direct sunlight. If possible, keep the
water pump in a dark place.
Do not store the pump in plastic bags, as they could create
moisture. Store your power tool in its original packaging.
Keep it out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
In accordance with the applicable European Directive, used
power tools must be collected separately and undergo
environmentally friendly recycling.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
