Trisa electronics 1862.42 Instrucciones De Uso página 31

EMC Guidance
Table 6: Recommended separation distances between portable and mobile RF communications equipment and the ME
EQUIPMENT or ME SYSTEM – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment and the device.
The device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer
or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmittters) and the device as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output power of
transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)
can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1
Note 2
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz 80 MHz to 800 MHz
3.5 d = 1.167
P d = [—]
V
1
Not applicable 0.117
Not applicable 0.369
Not applicable 1.167
Not applicable 3.690
Not applicable 11.67
At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
800 MHz to 2.5 GHz
d = 2.2333
0.233
0.738
0.233
7.338
23.33
31