Parker PSE Serie Manual De Uso página 5

open, slowly open the air outlet valve; the dryer is now drying.
Phases Monitor
If appears to display an alarm, during the start up of the dryer, the user
must verify the wiring of the input terminals of the disconnecting switch
of the dryer.
4.3 Operation
• Always leave the dryer on when the compressor is on and working.
• The dryer operates automatically , therefore constant fi eld adjustment
to settings is not required. See section 5 for navigating controls.
• In the event of unforeseen excess air fl ows or spikes in moisture load,
by-pass the dryer to avoid overloading it.
• Avoid inlet air temperature fl uctuations.
4.4 Stop
a) Stop the compressor or the air fl ow through the dryer and wait 2
minutes before shutting down the dryer;
b) Close the inlet air valve to ensure compressed air does not enter the
dryer when disconnected or if an alarm occurs.
set
c) Press to stop the dryer (for model 325-500).
Press to stop the dryer (for model 700-1000).
&
d) Turn the MAIN SWITCH " " to "O OFF" to switch power off.
Y
Wc version, close the water circuit with the dryer stopped.
English
5 Control
(325-500)
5.1 Control panel
Fig.1
QS Main power switch.
UP button: press to increase the value of a selected
editable parameter. Pressed for 3s start manual drain.
DOWN button: press to decrease the value of a selected
editable parameter.
esc
ESC button : to exit without saving;
returns to the previous level;
PRESSED FOR 5s. ALARM RESET.
set
SET button : to exit and saving/ confi rm the value;
go to the next level;
enter on Set Menu;
PRESSED FOR 5s. START DRYER.
esc
set
and . : press together at the same time to enter on the
parameters of the program
5.2 Symbol
Symbol Symbol status Function
k
Lit up compressor ON
Off compressor OFF
Lit up dryer ON
Flashing dryer OFF
Lit up Alarm present
!
Flashing Warning present
Off No alarm present
q
Lit up Condensate drain ON
Off Condensate drain OFF
illuminated dryer ON / Compressor OFF
Maintenance
illuminated
°C °F
grade
illuminated
Bar PSI illuminated
pressure
PSE 325-1000 60Hz
5.3 Parameter settings
Temperature measurement unit
How to set the temperature measurement unit.
esc
set
Press and together at the same time to enter general menu
"PAr" .
set
to fi nd menu " CF9" .
Press
set
Press to enter
to fi nd the menu " A1".
Use the arrows or
set
Press to choose: ON : Fahrenheit / OFF: Celsius.
PSI /
set
Press to confi rm.
esc
Press to exit.
esc set
PAr
set
esc
CF9
set
esc
--- A1
set
esc
OFF
Barg
On
3/14