Connecting The Dishwasher - Sears Kenmore ULTRA WASH 665.1715 Manual De Uso Y Cuidado

CONNECTING THE DISHWASHER
Portable Dishwashers (on some models)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Connecting the Faucet Adapter
NOTE= A special adapter must be installed on the faucet before
the dishwasher can be connected. Complete Installation
Instructions and the adapter are packed with your dishwasher.
(See the Installation Instructions.)
When moving your dishwasher, make sure the door is latched.
Hold the dishwasher at the top front corners.
Preparing the Faucet
1. Remove the screen holder or aerator, screen, and washer
from the end of the faucet.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher will
be used.
NOTE= Remove and save the washer, screen, and screen holder
or aerator for future use.
A .............
B ......................... @
C ........................... ,_
A o Washer
B. Screen
Connecting the Faucet Adapter to Faucets with
External Threads
Insert the 2 screens and then the thin washer from the faucet
adapter kit into the faucet adapter. Attach the adapter onto the
end of the faucet.
NOTE= Do not use the thick washer.
A ....... 0
A. Thin washer
B. Screens
C. Faucet adapter
Connecting the Faucet Adapter to Faucets with
Internal Threads
Insert the 2 screens, the thin washer, and then the thick washer
from the faucet adapter kit into the faucet adapter. Attach the
adapter onto the end of the faucet.
NOTE= Use both washers.
g ..... 0
A. Thick washer
B. Thin washer
C. Screens
D. FcTucet cTdCTpter
C. Screen holder or aerator