Publicidad
Idiomas disponibles
Idiomas disponibles
4. ASSEMBLY
WARNING! THE PRODUCT MUST BE FULLY ASSEMBLED BEFORE
OPERATION! DO NOT USE A PRODUCT THAT IS ONLY PARTLY
ASSEMBLED OR ASSEMBLED WITH DAMAGED PARTS! FOLLOW
THE ASSEMBLY INSTRUCTIONS STEP-BY-STEP AND USE THE
PICTURES PROVIDED AS A VISUAL GUIDE TO EASILY ASSEMBLE
THE PRODUCT !
4.1 UNBOXING
1
2
3
4
5
9
• WEAR GLOVES WHEN UNBOXING.
• DO NOT USE CUTTER, KNIFE, SAW OR ANY OTHER SIMILAR TOOL FOR
UNBOXING.
4.2 INSTALLATION
Assemble the blowing parts : illustrations 2.1 and 2.2
Slide the blowing tube (7) forward until the notched area on the blower housing clicks into the
slot on the blowing tube. Insert the blowing nozzle pressure tip onto the end of the blower tube
until it locks into position. Before using the blower function, rotate the lock wheel (4) to lock the
cover in place.
Assemble the vacuum parts : illustrations 2.A to 2.C
Slide both of the suction tubes (10 & 11) together until the lock button engages. Rotate the
lock wheel to unlock the suction port cover (5). With the blowing tube (7) removed, insert the
"hooked" Side end of the shred tube into the rear clip on the unit. Rotate the lock wheel to close
the front tube. Make the suction port cover (5) hook on the suction tube (11).
Insert the collection bag adaptor into the blower air outlet until the collection bag is securely
fastened, then make the bag hook the strap holder on the two sides of the suction tubes (10 & 11).
6
1. ON/OFF Switch
2. Main Handle
3. Power Cable
7
4. Lock Wheel
8
5. Suction port cover
6. Auxiliary Handle
7. Blowing tube
8. Blowing nozzle pressure tip
9. Auxiliary Handle
10
10. Pre-suction/shred tube
11
11. Post-suction/shred tube
12. Collection bag
12
• CARRY THE TOOL ONLY BY THE HANDLE (2, 6 & 9).
• KEEP THE BOX FOR FURTHER REUSE (TRANSPORT AND STORAGE).
• KEEP INSTRUCTION MANUAL IN A DRY AREA FOR FURTHER CONSULTATION.
179
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
