• Do not operate the appliance in the immediate
surroundings of baths, showers or swimming pools.
• Do not use the appliance on carpets.
• Do not use multiple sockets or extension cords.
• Please do not leave the appliance unattended.
• Do not attempt to repair, disassemble or change the
appliance by yourself.
• Please be careful of hot surfaces and do not touch
them as they might cause burns.
• The use of accessory not recommended by the
manufacturer, e.g. time switches, may cause harm.
• Only operate the appliance on a flat, stable and heat-
resistant surface.
• Remove the appliance from the wall socket when it is
not in use, before cleaning, when moving and in case
of malfunctions. Pull on the power plug, not on the
power cord.
• Never use the appliance with wet hands.
• Do not insert any objects into the appliance as this
may cause electric shocks, fire or damages to the
appliance.
• Do not place the heater directly under a power socket,
near curtains, drapes or other flammable materials as
well as walls and other objects.
• Never immerse the appliance, it's cord and plug into
water or other liquids.
Warning: In order to avoid overheating, do not
cover the heater.
Assembly (1)
1.
Remove the heater and all the accessories from the carton.
2.
Turn the heater upside down.
3.
Position the wheel base assemblies between the end fins.
4.
Attach them to the heater using the U-bolts and wing nuts.
5.
Tighten the wing nuts.
6.
Turn the heater the right way up.
GB