Roborock S7+ Manual Del Usuario página 24

Routine Maintenance
To maintain optimum performance, maintain the robot according to the following guidelines:
Part
Omni-Directional
Wheel
Main Brush
Side Brush
Washable Filter
VibraRise Mop Cloth
Charging Contacts (Robot)
Charging Contacts
(Charging Dock)
Dock Locator
Cliff Sensors
Carpet Sensor
Main Wheels
Note: Replacement frequency will vary depending on the actual situation. Should abnormal wear and tear occur, replace the relevant part.
All manuals and user guides at all-guidesbox.com
Maintenance Replacement
Frequency Frequency
As required /
2 weeks 6-12 months
Monthly 3-6 months
2 weeks 6-12 months
After each use 3-6 months
Monthly /
Monthly /
Monthly /
Monthly /
Monthly /
Monthly /
Maintenance Method
Use a screwdriver or similar tool to pry out the axles.
Rinse, allow to dry and press the wheel back in place.
Rotate the fasteners of the main brush caps in the
unlocking direction and take them down. After removing
the debris wrapped around the brush, reinstall the main
brush caps in the locking direction.
Use a screwdriver to unscrew the side brush. Remove any
entangled dirt and screw it back in place.
Remove and rinse, gently tapping to remove any dirt.
Air-dry for at least 24h before reuse.
Remove and clean the mop cloth after each use.
Wipe clean with a soft dry cloth.
Wipe clean with a soft dry cloth.
Wipe clean with a soft dry cloth.
Wipe clean with a soft dry cloth.
Wipe clean with a soft dry cloth.
Wipe clean with a soft dry cloth.
023