Descargar Imprimir esta página

VITO GARDEN VIBCMRSFL40 Manual De Instrucciones página 23

Publicidad

Idiomas disponibles

Idiomas disponibles

When the rotating accessory locks, immediately unplug
the tool.
▪ Make sure that the ventilation grids are not
obstructed during operation. Do not insert any
objects into the ventilation grids;
Maintenance and cleaning
Remove the battery from the power tool before start
cleaning, adjustment, repair or maintenance work.
Replace worn out or damaged parts immediately so that
the power tool is always operational and in a safe
operating condition.
Cleaning:
Always keep the power tool clean and dry, free of oil,
grease and lubricants.
accessories of the power tool after its use.
Do not use strong cleaning agents. These products can
damage plastics and metals and impair the safe
operation of your power tool.
Maintenance work:
Maintenance work may only be carried out as described
in these operating instructions; all other work must be
carried out by an official dealer.
Keep all nuts and screws well tighten so that the power
tool can operate safely.
If components or safety devices are removed for
maintenance work, they must be replaced correctly
immediately.
Use only attachable tools or accessories authorized by
VITO for this power tool or technically identical parts.
Otherwise injury or damage to the power tool may
occur. In case of doubt or if you lack the necessary
knowledge and means, you should contact an official
dealer.
Technical assistance
Your electric machinery should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts sourced directly from the manufacturer.
Clean all components and
23

Publicidad

loading