Publicidad
Idiomas disponibles
Idiomas disponibles
than preselected.
WARNING! Pressure, because of
overpressure in the air hose. Allow the
air pump to cool down for about 5 minutes
after every 5 minutes of operation in order to
prevent overheating.
NOTE: Stand 10 feet away from item being inflated.
4. BLOWER OPERATION
The low pressure hose can easily inflate or deflate
items such as air mattresses, rafts, floats, and other low
pressure items requiring large quantities of air.
WARNING! Ensure that the low-
pressure air hose with small head
adapter is not blocked during inflation.
Suctioning air
1) To suction out objects with a large volume until they
are empty (e.g. deflating an air mattress, etc.)
2) Connect the low-pressure air hose to the inlet for
suction.
3) Connect the low-pressure air hose to the object you
wish to deflate.
4) Switch on the equipment by pressing the selector
switch for inflator/blower mode button to "II" position.
5) When the desired pressure is reached, switch off the
equipment to "O" position once the object has been
sufficiently deflated.
Blowing
1) To blow objects with a large volume (e.g. inflating an
air mattress, etc.), connect the low-pressure air hose
to the outlet for blowing.
2) Connect the low-pressure air hose to the objects you
wish to inflate.
3) Switch on the equipment by pressing the selector
switch for inflator/blower mode button to "II" position.
4) Switch off the equipment to "O" position once the
object has been sufficiently inflated.
CAUTION! Always leave low pressure
hose free of obstructions when not in
use. Overheating could occur low pressure
hose is blocked.
5. SWITCH ON/OFF LED LIGHT (SEE FIG. H)
To Switch on the LED light, press the "
To Switch off the LED light, press the "off" position.
EN
MAINTENANCE
Remove the battery pack from the tool
and pull out the power adapter before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth.
• We recommend that you clean the device
immediately each time you have finished using it.
• Ensure that no water can seep into the device. The
ingress of water into an electric tool increases the
risk of an electric shock.
For Battery tools
The ambient temperature range for tool and battery use
and storage is 0°C-45°C.
The recommended ambient temperature range for the
charging system during charging is 0°C-40°C.
STORAGE
Accessories provided with the inflator can be placed in
the storage area located on the tool.
• Sport ball needle /tapered adapter/presta valve
adapter can be placed on the back side of the tool.
• Low-pressure air hose can be placed on the low-
pressure air hose holder.
• High-pressure air hose can be twisted on the back
side groove of the tool.
• 3m 12V Auto power adapter can be stored in the
inner bottom of the tool.
" position.
19
Publicidad
