Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
SET UP & USE
4. INSTALL DECORATIVE MOTOR HOUSING
•
Remove 4 screws and washers from sides of mounting bracket.
•
Position decorative motor housing so that the holes in housing align with holes in
mounting bracket.
•
Align motor with mounting bracket and slide in place until the four holes line up.
•
Tighten decorative motor housing using the 4 screws and washers previously
removed.
5. MOUNT BLADE BRACKETS TO BLADES
•
Take out hardware package.
•
Place blade bracket screw through, fibre washer and blade.
•
Align with corresponding hole in blade bracket.
•
Repeat with (2) remaining screws and tighten.
Blade
Bracket
Screw
Fibre
Washer
Page 12
Screws
Decorative Motor Housing
Blade
Bracket
Washers
Fig. 5
Fig. 6a
Publicidad
