Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
6. MOUNTING BLADE BRACKETS AND
BLADES TO MOTOR
•
Remove motor screws and lock washers from motor.
•
Insert a motor screw and lock washer into blade bracket.
•
Turn motor until hole spacing on motor corresponds with the holes in the blade
bracket.
•
Place fibre bracket gasket over screw.
•
Screw the motor screw into the motor (two turns). Repeat procedure for second
screw.
•
Tighten both screws down with screw driver.
Fibre Bracket Gasket
Lock Washer
Motor Screw
ENGLISH
Fig. 7
Page 13
Publicidad
