Publicidad
Idiomas disponibles
Idiomas disponibles
eN
dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using your
device for the first time and keep them along with the enclosed Product Control Card for later reference.
SAFETy inSTRucTiOnS
During work with this machine, improper handling and/or poor maintenance result in significant hazards
which can lead to destruction of the machine and serious accidents with considerable injuries. Observe all
safety instructions of this operation manual and contact the manufacturer if you have any questions.
!
Always...
• activate the switchable permanent magnet
completely
• activate the magnet on metallic, ferromagnetic
materials
• use the whole magnetic surface for working
• work on plane surfaces
• clean the magnetic surface and keep it clear
of dirt, swarf and welding sputter
• set the core drilling machine down gently to
prevent damage to the magnetic surface
• secure yourself with a safety belt when drilling
on walls or ceilings
• check connection cables for damage
• make sure the mains voltage matches the machine
• follow the instructions in the operation manual
• familiarise new users with the safe use of the
machine
• wear safety goggles and ear protection
during work
• use safety guard if supplied
• observe local, country-specific guidelines
• store in a dry place
People with cardiac pacemakers or other medical appliances may only use this machine
following approval by their physician.
never touch rotating parts! keep hands and fingers away from the work area while the
motor is running! Failure to do so can result in severe injuries!
PROPER uSE
This magnetic core drilling machine with switchable magnetic clamp is intended for drilling with core or
solid drills on ferromagnetic work pieces. It may only be used in a dry environment which is protected from
the weather. The machine may be used horizontally, vertically or overhead.
!
never...
• work on round or curved objects
• drill several work pieces on top of one another
• modify the core drilling machine or remove signs
• use the core drilling machine when damaged
or when parts are missing
• strain or damage the underside of the magnet
through heavy impact or blows
• use the core drilling machine without having
been properly instructed
• operate the machine without having read and
understood the complete operation manual
• use the core drilling machine to support, lift
or transport persons or loads
• carry out electric welding work on the work
piece at the same time as using the core
drilling machine
• store or operate the core drilling machine
at temperatures above 50°C (122°F)
• leave the machine hanging unsupervised
• allow the machine to come into contact with
corrosive materials
13
Publicidad
