Orbegozo PHE 50 Manual De Instrucciones página 17

PHE 50 PHE 70
C. Table of openings
ASSEM BLY PARTS & PROCEDURES
Tools needed:
Open end w rench 10 & 13 mm
Adjust able opening w rench (2) 8'' long
Slip joint pliers 9" long
Philips screw driver w / medium blade
Teflon plumbing t ape for joint s
Spray bot t le of soap solut ion for leakage t est
Part s supplied:
St and w it h LPG t ank housing
Assembly post w it h 3 pcs post bracket s
10 mm x 86 cm (L) galvanized st eel pipe
Reflect or 810 mm w it h 6 pcs w ashers Ø8 mm and 3 pcs cast les nut s
3 pcs 60mm(L) pins for reflect or support .
4 pcs bolt s M 6 x 10 mm for post and post and burner
6 pcs bolt s & nut s M 6 x 35 mm for post and post bracket s
3 pcs bolt s M 8 x 16 mm for post bracket s and st and
3 pcs ground fixer
6 pcs M 6 x 10 mm ground fixer bolt s & nut s
Assembly Procedures
STEP 1
1-1. Put t he t hree pcs post bracket s on each posit ion on t he base
as show n in t he pict ure.
1-2. Use 3 pcs M 8 x 16 mm bolt s t o join t he post bracket s and
st and.
STEP 2
2-1. Put t he post ont o t he t op of 3 pcs post bracket s.
2-2. Use 6 pcs M 6 x 35 mm bolt s and nut s t o connect t he post t o t he
3pcs post bracket s. Tight en t he bolt s and nut s.
17