Orbegozo PHE 50 Manual De Instrucciones página 18

PHE 50 PHE 70
STEP 3
3.1. Put t he t ank housing t hrough t he post .
STEP 4
4-1. Fit t he gas st eel pipe nut int o t he burner gas inlet connect or.
4-1-1. Secure t he reflect or support bolt s on t he flame screen cap w it h
3 pcs 60 mm lengt h pins & 3 pcs Ø8 mm w ashers.
4-1-2. Connect t he pins & w ashers t o t he flame screen.
4-1-3. Tight en t he pins.
4-2. Tight en t he gas st eel pipe nut and gas inlet t hread.
4-3. Put t he burner wit h st eel pipe ont o t he post .
4-4. Fix t he burner base t o t he post by 4 pcs M 6 x 10 mm bolt s.
STEP 5
5-1. Check w het her t he connect ion of vert ical post and burner are
assembled as inst ruct ion, and all bolt s and nut s are t ight ened.
5-2. Put t he flat w asher ont o t he t op of each burner/ reflect or support
bolt s
(M 8 t hread).
18