Publicidad
Idiomas disponibles
Idiomas disponibles
4
22900
5
25200
6
27500
7
30000
*The speeds in this chart are approximate and are for
reference only. Your router may not exactly produce the speed
listed for the dial setting.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! To minimize the danger of serious personal injury,
please switch off the tool power and disconnect all plugs/
remove battery before adjusting or removing/ installing any
accessory. Before reassembling the tool, press and release
the trigger switch to make sure the tool is already switched off.
Lubrication
STANLEY FATMAX tools are properly lubricated at the factory
and are ready for use.
Tools should be lubricated regularly every year depending
on usage. (Tools used on heavy duty jobs and tools
exposed to heat may require more frequent lubrication.)
This lubrication should be attempted only by trained power
tool repairperson's such as those at STANLEY FATMAX
service centers or in other qualified service personnel.
Cleaning
Warning! Regularly clean the ventilation slots in your tool
using a soft brush or dry cloth.
Warning! Never use solvents or harsh chemicals to clean
non-metal parts of the tool. These chemicals may weaken the
material of the parts. Use only mild soap and damp cloth to
clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into liquid.
IMPORTANT! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service
centers or other qualified organizations, always using identical
replacement parts. Unit contains no user service
able parts inside.
Optional Accessories
Warning! Since accessories, other than those
offered by STANLEY FATMAX, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only STANLEY
FATMAX, recommended accessories should be used with
this product. The performance of any power tool is dependent
upon the accessory used. STANLEY FATMAX accessories
are engineered to high quality standards and are designed to
enhance the performance of power tool.
Small diameter bits and cutters.
Softwoods, plastics, laminates.
(Original instructions)
By using STANLEY FATMAX accessories will ensure that you
get the very best from your STANLEY FATMAX tool.
STANLEY FATMAX offers a large selection of accessories
available at our local dealer or authorized service center at
extra cost.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Technical data
TYPE
Voltage V
No-Load speed /min (rpm)
Collet Size mm
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Battery
SFMCB201
/ SB201
Voltage
V
18
DC
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L
pA)
Sound power (L
) 88 dB(A), Uncertainty (K) 4 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Vibration emission Value (a
Declaration of conformity
The Supply of Machinery (Safety)
Regulatio
SFMCW400 Router
ENGLISH
SFMCW400
16,000 - 30,000
6.35mm, 8mm
SFMCB12 /
SC200
230
230
18
18
1.25
2
SFMCB202
SFMCB204
SFMCB206
/ SB202
/ SB204
18
18
2.0
4.0
Li-Ion
Li-Ion
77 dB(A), Uncertainty (K) 4 dB(A)
) <2.5 m/s
, uncertainty (K) 1.5 m/s
2
h
ns 2008
Type 01
18
SFMCB14
230
18
4
18
6.0
Li-Ion
2
11
Publicidad
