KOBE Brillia Serie Instrucciones De Instalación Y Manual De Operación página 11

Hood Installation
15. Align the hood with the telescopic stack so that the
motor harness is on the same side as the control unit
harness. Refer to Figure 6.
16. Fasten the hood body to the telescopic stack using
8 screws (provided). Refer to Figure 7.
17. Use 2 screws (provided) to secure the outer duct
cover to the hood body. Refer to Figure 8.
CAUTION: MAKE SURE THE HOOD IS SECURE
BEFORE RELEASING.
Final Assembly
18. Install the Baffle Filters.
19. Turn power ON in control panel. Check all lights
and fan operation.
20. Make sure to leave this manual for the homeowner.
All manuals and user guides at all-guides.com
9
Figure 6
Figure 7
Figure 8