DiO VDP-IP01 Guia De Inicio Rapido página 35

Wizard-Related Devices 4/4
Please enter the serial N°
012020033
DIOVDP-IP01-05 192.168.1.26
Previous
4.2 Connection to the wireless network
You do not have to connect your unit to the wireless network. It is only used to add it into the smartphone app for remote control
purposes.
Select the settings menu from the home screen
Then select the Wi-Fi icon from the left-hand menu
Select your network from the drop-down list
5. Installing the app
The application is available for Android and iOS.
Search for and install the "Guarding Vision" app on Android Play Store or Apple Store, depending on the model of your
smartphone.
Open the application and create a user account by following the on-screen instructions.
5.1 Set-up via QR code
Select the settings menu from the home screen on your video phone monitor
Then select the configuration icon
Go to "Guarding Vision service parameters" to record the unit's QR code.
In the "Guarding Vision" app on your smartphone, select the "+" icon in the top right corner.
Select "Analyse code" from the drop-down menu.
Use your camera to scan the QR code on the video-phone screen.
5.2 Manual set-up
Select the settings menu from the home screen on your video phone monitor
Then select the configuration icon
Go to "Information on the device" to record the serial number of the device.
In the "Guarding Vision" app on your smartphone, select the "+" icon in the top right corner.
Select "Add manually" from the drop-down menu.
Enter the serial number shown on the screen of your video phone.
Note:
The default password for your device is 123456
The default verification code for your device is ABCDEF.
V2.1 Build 200402 Activate
Finish
Step 5
Make sure that your exterior unit appears on the list of
peripherals.
An empty list indicates a problem with the wiring between
the monitor and the exterior unit.
If this is the case, power the unit down and check your
connections.