Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
Unit connection
After the clamp has been installed onto the beam, the lifting unit can be connected to the loading eye; please refer to the operation
and maintenance manual of the unit.
Important:
When the accessory is taken out of service, ensure that no load is being applied and that the load chain is loose enough
to be removed from the load.
STORAGE
The accessory should be stored in a dry, water-proof area. Clean the clamp and properly lubricate the moving parts.
MAINTENANCE
The accessory must be periodically inspected and tested with a load by a trained person, at least once a year, in accordance with
the safety regulations applicable in the country of use.
The mechanical parts must be periodically lubricated, especially after heavy or intensive use.
The condition of the lifting eye as well as of the jaws and adjusting screw must be checked regularly.
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations; it is covered by a 12-month warranty for
professional use and a 24-month warranty for non professional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty will
no longer be valid if any changes are made, or if the equipment is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
Fig. 4
Fig. 3
EN
I
Fig. 5
11
Publicidad
