Roger Technology H85/TTD Instrucciones Y Advertencias Para El Instalador página 27

15.1
Activating a user code
If the code has been stored in the memory, the keypad's green LV
Example:
If only one of the OUT channels is enabled (A ... B ... C ... D the associated OUT relay is activated immediately after
EXAMPLE with user code 89512 and only CH_A
NOTE:
WARNING!
• A maximum of 5 s may elapse between pressing one key and the next, otherwise an error alert is activated (the red
LR
• If a non-enabled function key 1/A, 4/B
• If you make a mistake while entering the code, press #
16
If the code is present in the memory, the red LR
Summarizing the example with user code 34741
17
For the security of the installation, it is recommended to change the password from the factory default value 0000.
The factory default password is 0000
Change password from 0000 to 12345, enter in sequence:
If the procedure is successful, the green LV
17.1
If the password is lost/forgotten, it can be reset to the factory default value (0000
N.B.: (H85/DEC2
To reset the password, if for example the user code 12345 is known, enter in sequence:
Factory password reset:
If the procedure is successful, the green LV
4/B - CH_B
:
34741
# # 34741
# # 34741 * 34741 *
0000
LR
* * 12345 #
LR LED on the keypad blinks rapidly 5 times and the buzzer sounds
34741 B
89512 *
34741
12345 # 12345 #
J1 as shown in
0000 # 0000 #
34741 (*)
LV LED lights up
, inset H
27 27