Roger Technology H85/TTD Instrucciones Y Advertencias Para El Instalador página 28

18
All user codes can be deleted from the memory, using either the H85/TTD keypad or the H85/DEC - H85/DEC2
Memory deletion using H85/TTD keypad
Enter in sequence on the H85/TTD keypad, using the last password entered (example last password entered 87654
If the password is correct, the green LV and red LR LEDs on the keypad blink slowly for 2 s, while the buzzer sounds
Erasing memory by H85/DEC interface
To erase the memory using the H85/DEC interface, proceed as follows:
POWER
OFF
OFF
L1
LIGHT UP
• Turn off the power;
• Press the PROG key and simultaneously restore power (without releasing the PROG
go out and the A, B, C, D LEDs light up; subsequently, the L1 and L2 LEDs light up and the A, B, C, D
• PROG
• Delete mode is activated and the L1 e L2
Erasing memory by H85/DEC2 interface
To erase the memory using the H85/DEC2 interface, proceed as follows:
• Turn off the power;
• Press the PROG key and simultaneously restore power (without releasing the PROG
up; they then go out and the L1
• PROG
• Delete mode is activated and the L1, A and B
19
Advanced function: code masking
WARNING! This feature is available for 6-digit user codes, to improve security when entering the code.
The code will be read from the 6 digits entered immediately before the (*
245672, output enabled OUT_ B.
28 28
H85/DEC POWER
ON
PROG
ON
PRESS
AND
HOLD ON
PROG
L2
RELEASE
POWER H85/DEC2
OFF
PROG
OFF
PRESS
AND
HOLD ON
L1
LIGHTS UP RELEASE
245672 * * B
# # * 87654 # # *
A B C D A
LIGHT UP
L1 L2
BLINK for 4 s
POWER
ON
A B
ON
LIGHT UP
PROG
L1 A
BLINK for 4 s
245672 * 057986...791964 * B
B C D
GO OUT
L1 and L2 LEDs
A B
GO OUT
B
A, B LEDs light