Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical Installation
Application Option 3
You can connect the sensor directly to the PLC with
a 0/4-20 mA connection.
1. Connect connection cable to sensor (A).
2. Connect cable to the PLC (B).
A
EN
12
12
B
1
2
4
3
PLC cable
1
brown
mA Out -
2 white
24 V
3
blue
GND
4
black
mA Out +
Initial Startup
Connect Sensor to Pump (Wizard)
Use the wizard in the DULCONNEX Blue App to connect
the sensor to the pump.
Prerequisites:
DULCONNEX Blue App is installed on your mobile de-
„
vice. You cannot set up or operate the sensor without
the app.
Bluetooth
is enabled on your mobile device and
„
®
pump.
The sensor and the pump are connected to power.
„
Procedure:
1. Open DULCONNEX Blue on your mobile device.
2. Switch to the "Devices" view.
+
3. Tap on
.
All Bluetooth devices that are nearby are displayed.
4. Tap on
.
The wizard will start and guide you through the con-
nection process.
Publicidad
