STERWINS ESH2-40.4 Manual De Instrucciones página 169

FR 2. SAFETY INSTRUCTIONS
ES
PT
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
IT
2.1 GENERAL POWER TOOL SAFETY WARNINGS
EL
The term «power tool» in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool. Do not operate the product near glass enclosures,
automobiles, trucks, window wells, drop-offs, etc. Without properly adjusting the aim of the
discharge.
PL
Do not force or overload the product. It will perform better and safer when it is used at the
rate that it was designed to work at.
If the product is already assembled, please make sure that all screws are tightly fixed before
RU
using it. If the product requires that you assemble it, please make sure upon opening the package
that all the elements needed for setting up the product have been provided. If the product is
damaged or has defects, do not use it and take it back to the nearest store.
KZ
2.2 WORK AREA SAFETY WARNINGS
A) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
UA
B) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
RO
fumes.
2.3 ELECTRICAL SAFETY WARNINGS
EN
A) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
B) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
C) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
WARNING READ ALL SAFETY WARNINGS, INSTRUCTIONS,
ILLUSTRATIONS AND SPECIFICATIONS PROVIDED WITH THIS
POWER TOOL. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED
BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS
INJURY.
C) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
D) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
E) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
F) The machine should be supplied via a
residual current device (RCD) with a tripping
current of not more than 30 mA. Use of an rcd
reduces the risk of electric shock.
168