Publicidad
Idiomas disponibles
Idiomas disponibles
FR
7. MAINTENANCE
7.1 CLEANING
ES
PT
Cleaning the product : illustration 5.1
Let the machine cool for 2 hours outside before cleaning it. Take the blade out of the blade latch.
IT
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the
equipment with a cloth. It is highly suggested that you clean the device after every use. Do not
use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
product.
EL
7.2 MAINTENANCE SCHEDULE
Part
PL
Blade
RU
KZ
7.3 REPLACEMENT
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage. If you shall replace the cutting blade, make sure that the
UA
following characteristics are the same : same shape, same length, same thickness, same
weight, same material.
The following part of this product may be replaced by the consumer.
RO
→ Blade (8231-545201)
Spare parts are available at an authorised dealer or through our customer service.
EN
WARNING ! DO NOT HANDLE CUTTING PARTS WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE,
POTENTIALLY CAUSING PERSONAL INJURY.
Action
CHECK
CLEAN
CHANGE
Before/After each usage
•
•
WHEN IT'S NECESSARY / REFER TO TROUBLE
SHOOTING
178
Every 10H
Publicidad
