Commercial Cool CCF54P50 Manual De Usuario página 12

ENGLISH
SET UP & USE
6. Choose a MOUNTING OPTION (Shown on page 7):
FLUSH INSTALLATION OPTION
If installing flush, remove the screws from the canopy and reinstall 3 screws to attach
the canopy to the motor housing as shown.
Complete the wiring as shown on page 15. It will require two people to complete this
installation. Someone will need to hold the canopy and motor housing, while the wires
are being connected.
Proceed to secure the fan to the ceiling as shown on page 16, step 11.
NORMAL DOWNROD OPTION
7. Remove clamp pin (1) and cross pin (2) from
downrod (3). Proceed to DOWNROD
INSTALLATION on the next page.
Page 12
Screws
Motor
Housing
1
Canopy
3
2