Descargar Imprimir esta página

cam CALIBRO Manual De Instrucciones página 21

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
CALIBRO 6 dicembre 2017 15 lingue_Layout 1 06/12/17 17:38 Pagina 21
behind the backrest of the child car
seat.
34. Remove the strap anchoring pin.
Release the straps.
35. Remove the straps from the car
seat.
Open the buckle.
36. Lift the fabric seat cover. Place the
buckle and the straps in the slots
provided in the seat.
How to remove the cover
Remove
the
5-point
described above.
37.
Remove
the
Remove the car seat cover.
How to fit the car seat harness and
cover.
38. Position the cover on the car seat.
39. Lift the seat cover. Pull out the
buckle and the straps from their slots
in the seat.
40. Thread the straps through the
backrest.
41. Fasten them to the anchoring pin.
Secure the anchoring pin to the seat of
the child car seat.
42. Fasten both the safety straps to the
metal "T" shaped hook located behind
the backrest of the car seat.
43. Bring the tongues together and
insert them in the buckle to close it.
Straighten up the fabric.
44. Check that the car seat is in good
working order and check all its parts
before fitting it back in the car.
Cleaning
Caution: The covers are an integral
part of the car seat: the car seat cannot
be used without the covers. The covers
can only be replaced with original
parts. The cover can be hand washed
in lukewarm water (max. 30°C) using
mild soap. Do not spin, do not iron and
do not use solvents. Follow the
washing instructions shown on the
label of the cover. Wash the plastic
parts with lukewarm water and soap.
Do not use aggressive substances.
The safety harness can be removed
INSTRUCTIONS FOR USE
and washed with lukewarm water and
soap. Caution: do not remove the
buckle tongues from the harness.
Checks
Carry
periodically for your own safety:
Check that the harness is always of a
suitable length and that the straps fit
snugly around your child. Check that
the straps are always of a suitable
height.
harness
as
Check that the harness is always in
perfect condition and does not show
headrest
cover.
any signs of wear or damage. Do not
use the product if the harness shows
signs of wear or damage.
Always check that your child has been
fastened in the seat correctly. Every so
often during the journey check that
your child has not loosened himself
from the car seat.
Spare parts
1 Headrest cover
2 Chest pads
3 Seat cover
4 Strap guide protection pads
5 Seat insert cover
6 EPS headrest protection
7 EPS l.h. + r.h. seat side protection
8 Rear flap
9 Top tether
10 Complete 5-point harness
11 Mounted Isofix base
12 Set of seat guards
13 Seat recline adjustment mechanism
14 Assembled headrest unit
15 L.h. + r.h. strap guide
16 Rear guard
17 Shell
18 Complete car seat without fabric
19 R.h. + l.h. assembled Isofix system
20 Isofix system handle
21 Instruction manual
22 Adhesive label kit
23 Box
out
the
following
checks
20

Publicidad

loading

Este manual también es adecuado para:

S164