Fronius Selectiva 4.0 UL B1 Manual De Instrucciones página 21

If the devices are arranged in a line one behind the other without being
staggered, the distance between the devices must be as follows:
a)
Wall and floor
mounting
Danger from incorrectly performed work and falling equipment
This can result in severe personal injury and damage to property.
▶
Depending on the substrate, different dowels and screws are required. Therefore,
dowels and screws are not part of the scope of supply. The system installer is re-
sponsible for selecting the proper dowels and screws.
Danger from objects falling or toppling over
This can result in severe personal injury and damage to property.
▶
▶
▶
Weight of the wall bracket:
B1
C1
Minimum distance 7.87 in. (20 cm)
WARNING!
The mounting must only be carried out by trained and qualified personnel.
WARNING!
Only use wall and floor mounting with the battery charger provided by the
manufacturer.
Mount the device horizontally.
For wall mounting, the load bearing capacity of the wall must be sufficient.
2.43 lbs. (1.10 kg)
2.98 lbs. (1.35 kg)
(a)
21