Descargar Imprimir esta página

Fronius Selectiva 4.0 UL B1 Manual De Instrucciones página 32

Publicidad

Idiomas disponibles

Idiomas disponibles

Danger due to incorrect type of battery and incorrect charging settings.
This can result in severe personal injury and damage to property.
Detailed information on the battery charger parameters can be found in the
figuration mode
Danger of damage to property due to heavy contamination of the charging plug
contacts.
Due to the increased contact resistance, overheating and subsequent destruction
of the charging plug can occur.
1
A prompt appears, asking whether the correct parameters have been set for the
battery to be charged.
The battery charger parameters can be set individually. Detailed information on
the battery charger parameters can be found in the
of the "Display" chapter. Make sure that the battery to be charged corresponds
to the battery charger configuration.
2
The battery charger detects the connected battery and starts charging. If the
start-up delay is activated, the charging process starts after the set delay time
has elapsed. Detailed information can be found in the
tion of the "Display" chapter.
During the charging process the display shows the following values:
-
-
-
-
-
32
WARNING!
Before starting the charging process, make sure that the correct type of bat-
tery is set on the battery charger.
The following settings must be made for the individual types of battery be-
fore charging:
Charging curve
Nominal voltage (number of battery cells)
Battery capacity (Ah) or charging time (h)
section of the "Display" chapter.
CAUTION!
Keep the charging plug contacts free of contamination and clean if neces-
sary.
Connect the mains plug of the battery charger to the electrical grid.
Plug in the charging plug.
Current charging current (A)
Current charging voltage (V)
Charge delivered (Ah)
Battery temperature with the "Temperature-controlled charging" option
Time (hh:mm) from start of charge
The display then appears in standard
mode. The display shows the battery
charger parameters:
-
Type of battery (e.g., Pb-WET)
-
Charging curve (e.g., IUI)
-
Nominal voltage (e.g., 48 V)
-
Capacity (e.g., 300 Ah)
-
Weekday, time, and date
Configuration mode
Configuration mode
Con-
section
sec-

Publicidad

loading

Este manual también es adecuado para:

Selectiva 4.0 ul c1