SICK WTS26 Manual De Instrucciones página 12

8020355 | SICK
Subject to change without notice
WTS26x-xxxxxx3xAxx with teach-in button
The sensing range is adjusted by pressing the teach-in button (approx. 1-3 sec.). We
recommend placing the object within the sensing range,
range has been adjusted, the object is removed from the path of the beam, which
causes the background to be suppressed and the switching output to change
table 2).
1
1...3 sec.
2
Figure 8: WTS26x-xxxxxx3xAxx, adjusting the sensing range with teach-in button
Detection of flat, glossy, contrast-rich, and uneven objects
If the objects are detected from above, we recommend installing the sensor at an angle
in order to prevent total reflection by a reflective surface
1 When adjusting the sensing range, the light spot should be focused on an even,
uniform surface, e.g. a white sheet of paper.
COMMISSIONING
figure 8. Once the sensing
(table
6
1,
11