Publicidad
Idiomas disponibles
Idiomas disponibles
Pruning shears Kantia E-22 TR long handled and telescopic handled
8
Components of the tool box
Tool
Large allen wrench
Small allen key
Phillips screwdriver
Sharpening corundum stone
Cleaning
1.
Do not spray the device with water or immerse it in water, as doing so may result in
electric shock.
2.
Keep the handle, motor compartment and equipment clean.
3.
Clean with a damp cloth or brush.
4.
Do not use any cleaning products.
5.
Thoroughly clean the blade after each use.
6.
Wipe the blade with an oily cloth and spray with metal protective spray.
7.
After 8 hours of continuous operation, we suggest to take off the front cover to remove
wood chips and other impurities inside.
Blade lubrication
When the shears get used intensively, of after a long period of non utilization, check regularly
the lubrication of the gears of the blade. Follow the instructions of Image A and B.
136
Art. 610 / Art. 611
Cleaning and maintenance
Function
Fastening the blade
Loosening central nut lock bolt
Unscrewing all the screws of device body and opening
the blade and counter-blade maintenance panel
Blade's sharpening
Art. 610 / Art. 611
Pruning shears Kantia E-22 TR long handled and telescopic handled
Cleaning and maintenance
A
B
Disassembly and assembly maintenance steps
General maintenance, cleaning, lubrication and replacement of the blades require limited
disassembly and assembly of your pruning shears. The cover is fastened to the pruning shears by
two screws. The centre bolt is secured with an adjustable nut that is locked in place by a toothed
washer. The nut clip is secured by a single bolt. By removing the cover, adjustment clip, nut and
central bolt you can access, maintain, clean, lubricate or replace the blades when necessary.
1
1. Remove the hexagon socket head screw in
the direction of number 1 in the image, then
remove the locknut and the locking screw.
Remove the adjustment clip bolt and toothed
washer.
For further information about the product, please contact info@stockergarden.com
8
A./B. Open the lid to
check the amount
of grease apply on
the gears.
2
2. Remove the self-tapping screws in the
direction of number 5 as shown in the
image.
137
Publicidad
