Publicidad
Wiring
Table 2: Interconnection between the relay card and the different
ATS equipment
ATS1811 relay card
Name
IN (item 3)
1
+12 V
2
Data
4
Latch
5
Clk
10
0 V
Table 3: Interconnection between two ATS1811 relay cards
ATS1811 relay card
Name
OUT (item 1)
1
+12 V
2
Data
4
Latch
5
Clk
10
0 V
Specifications
Supply voltage
Current:
Standby
Maximum (all relays active)
Contact rating:
Current, max.
Voltage, max.
Dimensions
Weight
Operating temperature
Relative humidity
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings
THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers
TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
2 / 20
ATS Master (J8), ATS1250 / 1260
(J21), ATS1201 (J8)
1
2
4
5
10
ATS1811 relay card IN (item 3)
1
2
4
5
10
10.5 to 13.8 V
(12 V
50 mA
250 mA
1A at 0 to 30 V
300 mA at 48 V
176 × 52 mm (size "BB" board)
253 g
−10 to +55°C
< 95% noncondensing
or scan the QR code.
EN 50131
REACH
Contact information
nom.)
www.firesecurityproducts.com or www.aritech.com
For customer support, see www.firesecurityproducts.com
DA: Installations vejledning
Beskrivelse
tidsstyret relækort ATS1811 indeholder otte 1-pols
x
Et 8
relæer med tilslutningsterminaler til fælles (C — Common),
normalt åbne (NO — Normally open) og normalt lukkede (NC
— Normally closed) kontakter.
Relækontakterne er dimensioneret til 1 A @ 0 til 30 V
faldende til 300 mA @ 48 V .
Relækort kan forbindes sammen og give op til 16 relæer, når
de tilsluttes til et DGP, 64 relæer i et ATS1260 4-elevators
DGP eller 255 relæer, når de tilsluttes til ATS-centralenheden.
For hvert relæ er der en LED, der angiver, om relæet er
aktiveret.
Montering af enheden
•
ATS Master-centralenhed eller 4-dørs/4-elevators DGP:
Afhængig af ATS kabinettet og det anvendte batteri, kan
ATS1811 monteres i ATS kabinettet eller i et særskilt
kabinet. Tilsluttes via det medfølgende kabel.
•
Alle DGP'er med 8-32 zoner: Op til to ATS1811'er kan
monteres på eksisterende støtteben i alle DGP'er med 8-
32 zoner, afhængigt af hvilke andre kort der er monteret.
Bemærk:
ATS1811 er en printplade i størrelse "BB".
Tabel 1: Maks. 8
Enhed
ATS Master centralenheder
EN 50131-1 System requirements
EN 50131-3 Control and indicating equipment
Security Grade 3, Environmental class II
Tested and certified by Telefication B.V.
Carrier Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.firesecurityproducts.com or
www.aritech.com.
Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
relæmoduler pr. ATS-enhed
x
Maks. antal
kort
32
P/N 1077859 (ML) • REV C • ISS 11DEC20
Maks. brugbare
kort
255
Publicidad
